Pro-Street Cycles
  

Online Catalogue
Pro-Street Cycles
Clocks & Thermometers
Harley® Clocks & Thermometers
Clocks & Thermometers For Fatboy® or Heritage®
 

Fatboy® or Heritage® "Grooved" Stem Nut Cover with Clock Fatboy® or Heritage® "Grooved" Stem Nut Cover with Clock New Style!


NEW STYLE!! Our new Grooved styling offers something a little different to our normal smooth clock casings. Each casing is machined from aircraft aluminum and incorporates a water-proof quartz clock.

Each housing is machined using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification.

Fits all Harley Davidson® Fatboy® and Heritage Softail® models (not FLSTS® Springer).

The clock is available with a choice of combination styles - Black Face/Chrome Bezel or White Face/Chrome Bezel.

All clocks feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. The clocks feature a metal case and special gasket that seals the lens and protects the movement from being damaged by water. Clocks are Triple plated for durability and incorporate scratch resistant glass lens. A Long life battery is pre-installed and ready to use.

The clock fits over the stem nut and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Installation is very easy and takes only a few minutes. Attractively packaged and fully guaranteed.

NEW!! All of our clocks and thermometers are now available in professionally powder-coated gloss black to special order - please contact us for details.

Want a Stem Nut Clock or Thermometer for your bike, but can't find one to fit? Contact us and we'll make you one!

Tell us the make, model and year of your bike. Use a socket or ring spanner to check the size of your bike's stem nut - take a couple of photos of the stem nut and send the info to us. We will then tell you if we can make a casing specific to your bike, how much it will cost and how long it will take.

The time for putting your glove down and your sleeve up just to have a look at your watch is now over.

Please Note: Our clocks are not the same as the usual cheap clocks found in other poor alternative products. Those clocks are usually gold in colour with roman numerals and plastic backs AND ARE NOT WATERPROOF!. You have to take the thing off every time to wash your bike or take it off while riding when it starts to rain..... and don't forget to take it off or else it's screwed!

Our clock casings are not a generic one-size fits all component as offered by other retailers - they are specifically designed to fit the stem nuts of the stated models!

Also our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!

Click Here for an alternative image of this product....!



Price:  £31.99 / €36.15

Available combination styles:


Fatboy® or Heritage® Stem Nut Cover with Clock

The cover is machined from billet aircraft aluminum and incorporates a water-proof quartz clock.

Each housing is machined using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification.

Fits Harley Davidson® Fatboy® and Heritage Softail® models (not FLSTS® Springer).

The clock is available with a choice of combination styles - Black Face/Chrome Bezel or White Face/Chrome Bezel.

All clocks feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. The clocks feature a metal case and special gasket that seals the lens and protects the movement from being damaged by water. Clocks are Triple plated for durability and incorporate scratch resistant glass lens. A Long life battery is pre-installed and ready to use.

The clock fits over the stem nut and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Installation is very easy and takes only a few minutes. Attractively packaged and fully guaranteed.

NEW!! All of our clocks and thermometers are now available in professionally powder-coated gloss black to special order - please contact us for details.

Want a Stem Nut Clock or Thermometer for your bike, but can't find one to fit? Contact us and we'll make you one!

Tell us the make, model and year of your bike. Use a socket or ring spanner to check the size of your bike's stem nut - take a couple of photos of the stem nut and send the info to us. We will then tell you if we can make a casing specific to your bike, how much it will cost and how long it will take.

The time for putting your glove down and your sleeve up just to have a look at your watch is now over.

Please Note: Our clocks are not the same as the usual cheap clocks found in other poor alternative products. Those clocks are usually gold in colour with roman numerals and plastic backs AND ARE NOT WATERPROOF!. You have to take the thing off every time to wash your bike or take it off while riding when it starts to rain..... and don't forget to take it off or else it's screwed!

Our clock casings are not a generic one-size fits all component as offered by other retailers - they are specifically designed to fit the stem nuts of the stated models!

Also our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!

Click Here for an alternative image of this product....!



Price:  £31.99 / €36.15

Fatboy® or Heritage® Stem Nut Cover with Clock
Available combination styles:


Fatboy® or Heritage® Stem Nut Cover with ThermometerFatboy® or Heritage® Stem Nut Cover with Thermometer

The cover is machined from billet aircraft aluminum and incorporates a water-proof Thermometer.

Each housing is machined using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification.

Fits Harley Davidson® Fatboy® and Heritage Softail® models (not FLSTS® Springer).

The thermometer is available with a choice of combination styles - Black Face/Chrome Bezel or White Face/Chrome Bezel.

All thermometers feature Luminescent hands and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. The thermometers feature a metal case and special gasket that seals the lens and protects the movement from being damaged by water. Thermometers are Triple plated for durability and incorporate scratch resistant glass lens.

The thermometer fits over the stem nut and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Installation is very easy and takes only a few minutes. Attractively packaged and fully guaranteed.

NEW!! All of our clocks and thermometers are now available in professionally powder-coated gloss black to special order - please contact us for details.

Want a Stem Nut Clock or Thermometer for your bike, but can't find one to fit? Contact us and we'll make you one!

Tell us the make, model and year of your bike. Use a socket or ring spanner to check the size of your bike's stem nut - take a couple of photos of the stem nut and send the info to us. We will then tell you if we can make a casing specific to your bike, how much it will cost and how long it will take.

The time for putting your glove down and your sleeve up just to have a look at your watch is now over.

Please Note: Our clocks and thermometers are not the same as the usual cheap clocks found in other poor alternative products. Those clocks are usually gold in colour with roman numerals and plastic backs AND ARE NOT WATERPROOF!. You have to take the thing off every time to wash your bike or take it off while riding when it starts to rain..... and don't forget to take it off or else it's screwed!

Our clock casings are not a generic one-size fits all component as offered by other retailers - they are specifically designed to fit the stem nuts of the stated models!

Also our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!



Price:  £31.99 / €36.15

Available combination styles:

Home
Up
Catalog
Info
Search
View Cart
Checkout
Send Mail