Pro-Street Cycles
  

Online Catalogue
Pro-Street Cycles
Clocks & Thermometers
Handlebar Clocks & Thermometers
 

BoldasBrass Bar ClockBoldasBrass Bar Clock
More Images: (Rollover to view)

BoldasBrass Bar Clock

Our NEW! BoldasBrass Bar Clock is crafted from solid brass, which is then designed to give you the look and quality of a classic vintage or old school looking timepiece, that will be sure to compliment and enhance the look of your bike.

Featuring a beautiful purpose-built solid brass housing that is then given a high mirror polish - this is sure to add a touch of class to your 7/8" or 1" handlebars. The housing is machined in the UK using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification..

Each housing incorporates a water-proof quartz clock.

Our instruments are available with a choice of combination styles - Your choice of WHITE or BLACK dials to match your factory gauges.

All our gauges feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. Our instruments feature a stainless steel case and special gasket that seals the lens and protects the movement from being damaged by water.

Our gauges are Triple plated for durability and incorporate scratch resistant mineral glass lens. A Long life battery is pre-installed and ready to use.

Our BoldasBrass Bar Clock will fit on the 1" or 7/8" bars of all makes of motorcycles.

Not sure of the size of your handlebars? The most common handlebar size for H-D and Cruiser motorcycles is 1"; however just to make 100% sure, you can measure the circumference of the bar at a straight section using either a piece of string, paper or a tape measure. A 1" bar will measure 3 1/8" (79.37mm), a 7/8" bar will measure 2 3/4" (69.85mm) and a custom fat or chubby bar (usually 1 1/4") will measure 3 7/8" (98.42mm) around.

Installation is very easy. The clock fits on the handlebar and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Our BoldasBrass Bar Clock can fit anywhere on the handlebars - the only real variable is determining the angle that provides the best view of the watch when you're on the bike, so you may want to sit on the bike to locate it in the position that works for you.

Attractively packaged and fully guaranteed.

Please Note: Our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!



Price:  £37.00 / €41.81

Available combination styles:


BoldasBrass Bar Clock - Fat Bars
More Images: (Rollover to view)

BoldasBrass Bar Clock

Our NEW! BoldasBrass Bar Clock is crafted from solid brass, which is then designed to give you the look and quality of a classic vintage or old school looking timepiece, that will be sure to compliment and enhance the look of your bike.

Featuring a beautiful purpose-built solid brass housing that is then given a high mirror polish - this is sure to add a touch of class to your 1 1/4" handlebars. The housing is machined in the UK using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification..

Each housing incorporates a water-proof quartz clock.

Our instruments are available with a choice of combination styles - Your choice of WHITE or BLACK dials to match your factory gauges.

All our gauges feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. Our instruments feature a stainless steel case and special gasket that seals the lens and protects the movement from being damaged by water.

Our gauges are Triple plated for durability and incorporate scratch resistant mineral glass lens. A Long life battery is pre-installed and ready to use.

Our BoldasBrass Bar Clock will fit on the 1 1/4" bars of all makes of motorcycles.

Not sure of the size of your handlebars? The most common handlebar size for H-D and Cruiser motorcycles is 1"; however just to make 100% sure, you can measure the circumference of the bar at a straight section using either a piece of string, paper or a tape measure. A 1" bar will measure 3 1/8" (79.37mm), a 7/8" bar will measure 2 3/4" (69.85mm) and a custom fat or chubby bar (usually 1 1/4") will measure 3 7/8" (98.42mm) around.

Installation is very easy. The clock fits on the handlebar and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Our BoldasBrass Bar Clock can fit anywhere on the handlebars - the only real variable is determining the angle that provides the best view of the watch when you're on the bike, so you may want to sit on the bike to locate it in the position that works for you.

Attractively packaged and fully guaranteed.

Please Note: Our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!



Price:  £37.00 / €41.81

BoldasBrass Bar Clock - Fat Bars
Available combination styles:


Freeway "Grooved" Bar ClockFreeway "Grooved" Bar Clock

Freeway "Grooved" Bar Clock

NEW STYLE!! New from Pro-Street Cycles. Our new "Grooved" styling offers something a little different to our normal smooth clock casings.

Our "Grooved" Freeway Bar Clock is designed for direct attachment to the handlebar and will compliment the gauge or gauges already on your bike.

Featuring a beautiful purpose-built billet aluminium housing that is then given a high mirror polish - this is sure to add sparkle on your handlebars. All of our billet handlebar clocks are now available in four standard sizes - 7/8" (22.22mm), 1" (25.4mm), 1 1/8" (28.5mm) & 1 1/4" (31.75mm). Other sizes are available by special order - please contact us for details.

The housing is machined using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification..

Each housing incorporates a water-proof quartz clock.

Our instruments are available with a choice of combination styles - Your choice of WHITE or BLACK dials to match your factory gauges.

All our gauges feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. Our instruments feature a stainless steel case and special gasket that seals the lens and protects the movement from being damaged by water.

Our gauges are Triple plated for durability and incorporate scratch resistant mineral glass lens. A Long life battery is pre-installed and ready to use.

Our Freeway Bar Clock will fit on the 7/8", 1", 1 1/8" or 1 1/4" bars of all makes of motorcycles.

Not sure of the size of your handlebars? The most common handlebar size for H-D and Cruiser motorcycles is 1"; however just to make 100% sure, you can measure the circumference of the bar at a straight section using either a piece of string, paper or a tape measure. A 1" bar will measure 3 1/8" (79.37mm), a 7/8" bar will measure 2 3/4" (69.85mm) and a custom fat or chubby bar (usually 1 1/4") will measure 3 7/8" (98.42mm) around.

Installation is very easy. The clock fits on the handlebar and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Our Freeway Bar Clock can fit anywhere on the handlebars - the only real variable is determining the angle that provides the best view of the watch when you're on the bike, so you may want to sit on the bike to locate it in the position that works for you.

Attractively packaged and fully guaranteed.

NEW!! All of our clocks and thermometers are now available in professionally powder-coated gloss black to special order - please contact us for details.

Please Note: Our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!

Click Here for more great images of this product....!



Price:  £31.99 / €36.15

Handlebar Size

Available combination styles:


Freeway Bar Clock
More Images: (Rollover to view)

Freeway Bar Clock

Our NEW! Freeway Bar Clock is designed for direct attachment to the handlebar and will compliment the gauge or gauges already on your bike.

Featuring a beautiful purpose-built billet aluminium housing that is then given a high mirror polish - this is sure to add sparkle on your handlebars. All of our billet handlebar clocks are now available in four standard sizes - 7/8" (22.22mm), 1" (25.4mm), 1 1/8" (28.5mm) & 1 1/4" (31.75mm). Other sizes are available by special order - please contact us for details.

The housing is machined using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification..

Each housing incorporates a water-proof quartz clock.

Our instruments are available with a choice of combination styles - Your choice of WHITE or BLACK dials to match your factory gauges.

All our gauges feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. Our instruments feature a stainless steel case and special gasket that seals the lens and protects the movement from being damaged by water.

Our gauges are Triple plated for durability and incorporate scratch resistant mineral glass lens. A Long life battery is pre-installed and ready to use.

Our Freeway Bar Clock will fit on the 7/8", 1", 1 1/8"or 1 1/4" bars of all makes of motorcycles.

Not sure of the size of your handlebars? The most common handlebar size for H-D and Cruiser motorcycles is 1"; however just to make 100% sure, you can measure the circumference of the bar at a straight section using either a piece of string, paper or a tape measure. A 1" bar will measure 3 1/8" (79.37mm), a 7/8" bar will measure 2 3/4" (69.85mm) and a custom fat or chubby bar (usually 1 1/4") will measure 3 7/8" (98.42mm) around.

Installation is very easy. The clock fits on the handlebar and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Our Freeway Bar Clock can fit anywhere on the handlebars - the only real variable is determining the angle that provides the best view of the watch when you're on the bike, so you may want to sit on the bike to locate it in the position that works for you.

Attractively packaged and fully guaranteed.

NEW!! All of our clocks and thermometers are now available in professionally powder-coated gloss black to special order - please contact us for details.

Please Note: Our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!.

WE SELL - WHAT WE MAKE!

Click Here for more great images of this product....!



Price:  £31.99 / €36.15

Freeway Bar Clock
Handlebar Size

Available combination styles:


Freeway Bar ThermometerFreeway Bar Thermometer

Freeway Bar Thermometer

Our NEW! Freeway Bar Thermometer is designed for direct attachment to the handlebar and will compliment the gauge or gauges already on your bike.

Featuring a beautiful purpose-built billet aluminium housing that is then given a high mirror polish - this is sure to add sparkle on your handlebars. All of our billet handlebar clocks are now available in four standard sizes - 7/8" (22.22mm), 1" (25.4mm), 1 1/8" (28.5mm) & 1 1/4" (31.75mm). Other sizes are available by special order - please contact us for details.

The housing is machined using state of the art milling tools, which ensures surface integrity and provides a precision finish to the highest specification..

Each housing incorporates a water-proof Thermometer.

Our instruments are available with a choice of combination styles - Your choice of WHITE or BLACK dials to match your factory gauges.

All our gauges feature Luminescent hands and dials and have a "soft gasket" mounting system that helps insulate against the damaging effects of vibration. Our instruments feature a stainless steel case and special gasket that seals the lens and protects the movement from being damaged by water.

Our gauges are Triple plated for durability and incorporate scratch resistant mineral glass lens.

Our Freeway Bar Thermometer will fit on the 7/8", 1", 1 1/8" or 1 1/4" bars of all makes of motorcycles.

Not sure of the size of your handlebars? The most common handlebar size for H-D and Cruiser motorcycles is 1"; however just to make 100% sure, you can measure the circumference of the bar at a straight section using either a piece of string, paper or a tape measure. A 1" bar will measure 3 1/8" (79.37mm), a 7/8" bar will measure 2 3/4" (69.85mm) and a custom fat or chubby bar (usually 1 1/4") will measure 3 7/8" (98.42mm) around.

Installation is very easy. The Thermometer fits on the handlebar and is tightened with a small set screw using a hex wrench (which is supplied). The set screw is well-hidden, which makes for a clean mounting after the unit is installed.

Our Freeway Bar Thermometer can fit anywhere on the handlebars - the only real variable is determining the angle that provides the best view of the watch when you're on the bike, so you may want to sit on the bike to locate it in the position that works for you.

Attractively packaged and fully guaranteed.

NEW!! All of our clocks and thermometers are now available in professionally powder-coated gloss black to special order - please contact us for details.

Our casings are not the usual mass produced low grade products made in the Far East that are offered by everyone else - these are Precision-crafted from excellent materials by Pro-Street Cycles in the UK - ask anyone else if their's are!..

WE SELL - WHAT WE MAKE!



Price:  £31.99 / €36.15

Handlebar Size

Available combination styles:

Home
Up
Catalog
Info
Search
View Cart
Checkout
Send Mail